Super Armor Moisture Cure Preservation Coating 9100

Pro Guard 9100 Super Armor (Clear) | A Preservation Coating

Super Armor was specifically formulated to waterproof, reduce dirt accumulation and mildew growth and facilitate the removal of graffiti on stone and stucco buildings without damaging the coating.

When applied to the exterior of a newly cleaned and painted structure SUPER ARMOR forms a nearly invisible membrane envelope which does not change the appearance of color or texture of the surface.

Graffiti can easily be removed by applying a paint stripper followed by a high pressure rinse.

ProGuard Coatings has greatly improved the storage stability of SUPER ARMOR by packaging the catalyst separately. When the catalyst is added, however, the mixed product must be applied in approximately one hour to prevent skinning or thickening in the container. The applied material will cure in 1 to 3 hours. Although SUPER ARMOR utilizes recently developed chemistry, it is based on a very durable Urethane Polymer which makes it reasonable to project a 15 year service life for the coating.

  • Cures in 1-3 Hrs. by absorbing moisture from the air
  • Waterproofs porous surfaces
  • Prevents dirt pickup
  • Permits graffiti removal
  • Can be applied to damp surfaces
  • Cures at low temps 33 degrees fahrenheit (1 degree celsius)
  • Produces a clear invisible film

ProGuard Coatings Super Armor

Left: Super Armor applied to cement block at 32 degrees fahrenheit
Center: Ink spilled on cured Super Armor coated surface
Right: Ink or paint does not bond to Super Armor coated surface. Easily washes off.

 

pro_guard_product_tilesSUPER ARMOR-03

pro_guard_product_tilesSUPER ARMOR-01

pro_guard_product_tilesSUPER ARMOR-02

ProGuardfindadistrib