Pro Guard Epoxy® 2468

Proguard-Epoxy-2468

Pro Guard Epoxy 2468

This product is a two component, 100% solids epoxy system for high-build protection of many substrates. Its ease of use and application, coupled with its excellent protective properties, makes Pro Guard Epoxy 2468 a good choice for coating structural substrates in less than perfect environmental conditions, including dry or damp concrete or in temperatures between 40 and 50 deg. F. Pro Guard Epoxy 2468 possesses exceptional bond strength with concrete.

Advantages

  • Convenient 1:1 mixing ratio
  • Protects dry as well as damp surfaces
  • Has exceptional tensile and bond strength
  • Has outstanding chemical resistance
  • Abrasion resistance for years of service
  • Superior adhesion to common structural substrates
  • Ease of use and application with high build
  • Lower temperature cures

Proguard-Epoxy-2468

Pro Guard Epoxy 2468
Product Data Sheet

  • Convenient 1:1 mixing ratio
  • Protects dry as well as damp surfaces
  • Has exceptional tensile and bond strength
  • Has outstanding chemical resistance
  • Abrasion resistance for years of service
  • Superior adhesion to common structural substrates
  • Ease of use and application with high build
  • Lower temperature cures

Mixing
Mix each component separately before blending. Measure out equal volumes of components A and B in a clean container. Mechanical mixing is necessary for proper blending. Mix only the amount which can be used within product’s pot life.

Application
This product is designed to be applied with airless spray, but brush or roller application is possible in smaller areas. Thinning should be done sparingly and only when necessary for spray application. Use Pro Guard Epoxy™ Thinner.

Limitations
Do not apply over wet substrates or where transmitted vapor can condense and freeze underneath the coating. Surface temperature should be above 50 deg. F. and relative humidity should be 95% or below. New concrete should be aged 3 to 6 weeks prior to application.

Precautions
FOR INDUSTRIAL USE ONLY. May cause injury to skin following prolonged or repeated contact. Component B contains alkaline amine, a strong sensitizer. Do not get in eyes or on skin or clothing. Avoid breathing vapors. Keep containers closed. Use with adequate ventilation. Wash thoroughly after use. Wear protective clothing, eyewear and gloves. KEEP OUT OF REACH OF CHILDREN. See Material Safety Data Sheet for further precautions and first aid information.

The information presented herein is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patents.

Proguard-Epoxy-2468

Pro Guard Epoxy 2468

Technical Data

Volume Solids: 100%

Theoretical Coverage:  1590 sq ft/gal @ 1 mil DFT

Minimum DFT required: 5 mils

Number of Coats: One or Two

Mixing Ratio: 1:1 by Volume

Pot Life: 90 min. @ 70° F.

Cure Time: Foot Traffic; Overnight

Full Cure;  72 hrs.

Shelf Life: 1 year minimum (in original closed container)

Color: Gray

Storage: Store in cool, dry area.  For best results material should be at least 70° F.  for mixing and application.

Stormer Viscosity: 120 KU

Tensile Strength: 6400 psi

Compressive Strength: 1 day – 6100 psi
7 days – 8900 psi
28 days – 9500 psi

Limitations

Do not apply over wet substrates or where transmitted vapor can condense and freeze underneath the coating. Surface temperature should be above 50 deg. F. and relative humidity should be 95% or below. New concrete should be aged 3 to 6 weeks prior to application.

Precautions

FOR INDUSTRIAL USE ONLY. May cause injury to skin following prolonged or repeated contact. Component B contains alkaline amine, a strong sensitizer. Do not get in eyes or on skin or clothing. Avoid breathing vapors. Keep containers closed. Use with adequate ventilation. Wash thoroughly after use. Wear protective clothing, eyewear and gloves. KEEP OUT OF REACH OF CHILDREN. See Material Safety Data Sheet for further precautions and first aid information.

The information presented herein is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patents.