Pro Guard Epoxy® 2228 F5251

Proguard-Epoxy-2228-

Pro Guard Epoxy 2228
F5251

Description:

High solids, 2-component polyamide epoxy.
Mix ratio 1:1.

Uses:

Excellent for swimming pools. For use on metal and concrete surfaces subject to continuous or intermittent immersion. May be used for cold or hot water up to 200 degrees F.

As a protective liner for tanks and impoundments in sewage and water treatment plants, pulp and paper mills, and processing industries. Resistant to abrasion, splash and spillage of alkalis, various oils as well as most solvents.

May be used as a maintenance coating, with proper surface preparation, to upgrade previously coated surfaces without removing the old finish. Spot test for compatibility is recommended.

Temperature Limitations:

250 degrees F. dry;
200 degrees F. continuous immersion.

 

Proguard-Epoxy-2228-

Pro Guard Epoxy 2228
F5251
Product Data Sheet

Application Methods:
Air or airless spray, roller or brush. Do not apply at temperatures below 50 degrees F. or if rain is expected before coating has cured.

Mixing Instructions:
Mechanically mix each component separately, then mix again after combining parts A & B. Let stand for at least 30 minutes at a temperature of 70 degrees F. or above. Longer induction periods must be allowed between 50 degrees and 70 degrees F. to initiate chemical reaction before using.

Surface Preparations:
Surface must be dry, free from dirt, oil, grease and other foreign contaminants.

Primers:
Self priming on steel and concrete if there is likely to be an interval or more than 24 to 30 hours before recoating.

Steel:
Mill scale and foreign matter must be removed by abrasive blasting. Weld seams must be brush blasted and receive 2 coats of a quality steel primer.

For atmospheric service, abrasive blast to a minimum SSPC-SP-6 Commercial Grade.

For immersion service, abrasive blast to minimum SSPC-SP-10 Near White Grade.

Masonry Wood and Wallboard:
Thin first coat of Pro Guard Epoxy 2228 by about 10% with Pro Guard Epoxy™ Thinner for better penetration.

Packaging: 2-gallon kits

Precautions:
See Materials Safety Data Sheets for this product.
Before mixing components READ PRECAUTIONS ON BOTH COMPONENTS. For industrial use only. The following precautions apply to the each component as well as the mixed products: DANGER! KEEP OUT OF REACH OF CHILDREN. FLAMMABLE LIQUID AND VAPOR. CAUSES SEVERE EYE IRRITATION. CAUSES NOSE, THROAT AND SKIN IRRITATION. HARMFUL IF INHALED. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM, CAUSING DIZZINESS, HEADACHE OR NAUSEA. MAY CAUSE ALLERGIC REACTION. CAN BE ABSORBED THROUGH THE SKIN. MAY CAUSE KIDNEY AND LIVER DAMAGE.

The information presented is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patents.