PROFLEX PRIMER®  F1501 White

Usage • Existing Epoxy and Urethane coatings cannot be readily recoated without encountering intercoat adhesion problems. Proflex Primer® makes it possible to recoat them with the same or different type of coating. • Severely weathered wood and insulating foams have degraded surfaces that can be “reconstituted” with an application of Proflex Primer® that can then be topcoated. • Proflex Primer® when applied to EPDM rubber membrane will prevent swelling caused by absorption of oils, fats and solvents around restaurant roof vents. • Thermoplastic roofing membranes such as Hypalon and others can be recoated after applying Proflex Primer®. Properties and Appearance Proflex Primer® has a low hiding white color.  It will begin to chalk after 3 months exposure to sun if not topcoated. Cured films are quite flexible yet have high bond and tensile strength. This enables the product to reconstitute and stabilize severely deteriorated surfaces. Although Proflex Primer® has good water, solvent and chemical resistance it is primarily designed to be an intermediate bond coat so that high performance and special purpose coatings can be applied to existing substrates. The information presented herein is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patent

[button size="large" style="style1" link="https://proguardcoatings.com/wp-content/uploads/2015/06/PG-EU-SDS-1501-PART-A-v1-Jul-2013-draft.pdf" target="_blank"]PG EU SDS 1501 PART-A[/button]

[button size="large" style="style1" link="https://proguardcoatings.com/wp-content/uploads/2015/06/PG-EU-SDS-1501-PART-B-v1-Nov-2014-draft.pdf" target="_blank"]PG EU SDS 1501 PART-B[/button]

  [accordion opened="false"] [accordion_item title="Info"]

PROFLEX PRIMER®

F1501 White

Proflex Primer® is a two component,
ready to apply, flexible epoxy primer
with a one to one volume mix ratio.

Applications

*Polished Aluminum
*Galvanized Steel
*Glass
*Copper
*Stainless Steel
*Concrete and Masonry
*Wood and Masonite
*Rigid and Flexible Foams
*Rubber Membranes
*Epoxy Coatings
*Thermoplastic Membranes
*Urethane Coatings
*Plastics
*Elastomeric Coatings
*Fiberglass
*Acrylic and Alkyd Coatings

Proflex Primer® produces a surface profile that allows for a recoat interval of 2 to 3 months. The primer should not be exposed to sunlight for more than 3 months to prevent film degradation.

Usage

• Existing Epoxy and Urethane coatings cannot be readily recoated without encountering intercoat adhesion problems. Proflex Primer® makes it possible to recoat them with the same or different type of coating.

• Severely weathered wood and insulating foams have degraded surfaces that can be “reconstituted” with an application of Proflex Primer® that can then be topcoated.

• Proflex Primer® when applied to EPDM rubber membrane will prevent swelling caused by absorption of oils, fats and solvents around restaurant roof vents.

• Thermoplastic roofing membranes such as Hypalon and others can be recoated after applying Proflex Primer®.

Properties and Appearance

Proflex Primer® has a low hiding white color.  It will begin to chalk after 3 months exposure to sun if not topcoated.

Cured films are quite flexible yet have high bond and tensile strength. This enables the product to reconstitute and stabilize severely deteriorated surfaces.

Although Proflex Primer® has good water, solvent and chemical resistance it is primarily designed to be an intermediate bond coat so that high performance and special purpose coatings can be applied to existing substrates.

The information presented herein is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patent

[/accordion_item] [/accordion] [accordion opened="false"] [accordion_item title="Product Data Sheet"]

ProFlex-Primer-F1501-WHITE

PROFLEX PRIMER®

F1501 White

PRODUCT DATA SHEET

Proflex Primer® is a two component, ready to apply, flexible epoxy primer with a one to one volume mix ratio.

Applications

Polished Aluminum – Galvanized Steel – Glass – Copper – Concrete and Masonry – Stainless Steel – Wood and Masonite – Rigid and Flexible Foams – Rubber Membranes – Epoxy Coatings – Thermoplastic Membranes – Urethane Coatings – Plastics – Elastomeric Coatings – Fiberglass – Acrylic and Alkyd Coatings

Proflex Primer® produces a surface profile that allows for a recoat interval of 2 to 3 months. The primer should not be exposed to sunlight for more than 3 months to prevent film degradation.

Usage

• Existing Epoxy and Urethane coatings cannot be readily recoated without encountering intercoat adhesion problems. Proflex Primer® makes it possible to recoat them with the same or different type of coating.

• Severely weathered wood and insulating foams have degraded surfaces that can be “reconstituted” with an application of Proflex Primer® that can then be topcoated.

• Proflex Primer® when applied to EPDM rubber membrane will prevent swelling caused by absorption of oils, fats and solvents around restaurant roof vents.

• Thermoplastic roofing membranes such as Hypalon and others can be recoated after applying Proflex Primer®.

Properties and Appearance

Proflex Primer® has a low hiding white color.  It will begin to chalk after 3 months exposure to sun if not topcoated.

Cured films are quite flexible yet have high bond and tensile strength. This enables the product to reconstitute and stabilize severely deteriorated surfaces.

Although Proflex Primer® has good water, solvent and chemical resistance it is primarily designed to be an intermediate bond coat so that high performance and special purpose coatings can be applied to existing substrates.

Surface Prep

Substrate should be dry, free of debris, dirt, moss, algae, mildew and oil. Loose or peeling paint must be removed. Make repairs and tighten or replace fasteners prior to application of primer. High pressure washing is an effective cleaning method.

Method of Application

A combination of rubber squeegee, roller and brush are most practical on flat surfaces. A pressure pot spray system may be used if pot life limitations can be adhered to.

Recommended Spreading Rate

When spread at 250 sq. ft. per gallon a 5.5 mil dry film will result on a smooth surface. Although this is sufficient for bonding to the substrate it may be difficult to achieve in practice. A squeegee and roller application will usually result in covering 150-175 sq. ft. per gallon which results in an average dry film thickness of 8-9 mils. Rough or porous surfaces will require a lower coverage per gallon.

The above data is gathered in a controlled Laboratory environment.  Your conditions will vary.  Pot Life, Gel Time, Dry Time and Cure Time will all be affected by ambient as well as surface temperatures.  Higher temperatures shorten the time you have to work with the product.  Always mix thoroughly and immediately pour out of the container onto the surface to be coated.  Only mix the amount you can easily spread within 30 minutes.  If more specific information is needed please call Pro Guard Coatings at 800-735-4399

The information presented herein is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patents.

[/accordion_item] [/accordion] [accordion opened="false"] [accordion_item title="Tech Data"]

ProFlex-Primer-F1501-WHITEPro Flex Primer

F1501 White | Tech Data

Chemical Type           Two Component, flexible Epoxy

Solids Content 86% by Volume; 89% by weight

Weight per Gallon      9.2 pounds

Spread rate at 1 mil    1379 square feet

Mix Ratio       1 to 1 by volume

Viscosity         71KU (900 cp) @ 77° F

Pot Life           45 minutes @ 70° F

Cure Time       10 hours to touch at 70° F

Bond Strength 250 psi (aged)

Tensile Strength         404 psi after 7 days @ 77° F Temp.

2500 psi after 7 days chilled

Elongation      200% @ 77° F

Flash Point      Above 150° F

Compatible Solvents  Xylene, Toluene

Storage Stability         1 yr minimum

VOC    118 g/l (.99 lb/gal)

The above data is gathered in a controlled Laboratory environment.  Your conditions will vary.  Pot Life, Gel Time, Dry Time and Cure Time will all be affected by ambient as well as surface temperatures.  Higher temperatures shorten the time you have to work with the product.  Always mix thoroughly and immediately pour out of the container onto the surface to be coated.  Only mix the amount you can easily spread within 30 minutes.  If more specific information is needed please call Pro Guard Coatings at 800-735-4399

The information presented herein is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patents.

[/accordion_item] [/accordion]

[button size="large" style="style1" link="https://proguardcoatings.com/wp-content/uploads/2014/10/pds_F1501_PROFLEX_PRIMER_printable-3-7-14.pdf" target="_blank"]Proflex Primer F1501 PDS[/button]

[gallery link="file" ids="1619,1620,1592,1608,1611,1612,1631,1617,1635,1636"]